Category: Mixing

A Quick Ableton Tip – Corpus Sidechain Feature

Heavyweight Bass Facebook group member, Ner Mage, shared this great little tip for adding some magic to your drums…

“Ableton’s Corpus has an amazing and quite often overlooked sidechain feature which, when Frequency/Last is enabled, the tuning of the resonance is determined by the incoming MIDI note, effectively keeping it in Key with the signal. This is great for adding resonance and depth to drums like toms, bass drums and 808’s for that extra boom!”
12833309_10208318613179955_244726153_n

The Heavyweight Bass Producer Forum is up on Facebook – click here to join the discussions

Don’t forget to stop by the Heavyweight Bass Facebook page and give us a LIKE !!

Heavyweight Bass Group Members Share Their Go-To Vibes When Producing, Mixing and Mastering – Part 3

12745537_10154054713882125_3142870951590149678_n

Two weeks ago in the Heavyweight Bass Facebook group, members had a lengthy discussion on their go-to vibes in the studio. We decided to post them in a series of articles for all of you!

 

If you missed them, you can read Part 1  and Part 2

 

 

Ner Mage – Been using a lot of envelope followers and LFO’s to control parameters slowly overtime to help get a more evolving feel to instruments, and it also helps to make sonic room in the track. When things get loud, it can automatically turn down other things and so on, boost or cut frequencies according to envelopes of other sounds. Also like using a frequency shifter with just a hair of shifting Hz , barely a semitone and slow, just to get some movement in the track without it being noticeable and it prevents the song/instrument from sounding the same all the way through.

Sean Clayton – K-metering and having a simple essential mixing chain to begin with – At the moment mine is Saturator, a precise eq (eq8) compressor then a emulation eq (UAD harrison). I find using this same chain on every track gives me a unified sound. Of course not everything has to be used and I can swap out what I want but I find this helps to make decisions. Also, for Ableton guys save your return tracks as audio effect racks then you can import them into other projects.

Kendal Osborne

  1. Big believer in templates for bussing and effects. Allows you to quickly and easily route stuff and audition effects. Great for quick inspiration.
  2. Parallel processing is a big one for me too. But not just compression – parallel saturation and distortion is great too. I really dig working big to small. Starting with busses and working my way down to individual tracks – trying to keep an eye on the big picture.
  3. I mix in mono for about 50% of the mix, easily half the day is completely mono.

I should clarify – It starts with a basic balance of the song, flat. If there are any problems you need to address – E.g, obscene amounts of low rumble on something, noise, piercing high frequencies on a track… Fix those first. If it’s gonna bother you the entire mix, get it out of the way. But make that part quick.

Colin Cameron Allrich – I’m a big fan of compression after delays, esp a 1176 in “all button mode”

James Wiltshire – Sonnox Inflator is brilliant on groups and busses to stop very sudden overs for example when a loud clap joins with a snare to throw a peak 10-15db above average.

Slade Templeton – Running a lot of parallel, even at the mastering stage!!!! I’ve also been really hitting a lot of saturation in a tasteful way via Culture Vulture and other various outboard or plugs. More so than I ever have before. It’s really brought my mixes to life. Been putting more saturation when needed on my mix buss too than I used to.

Tom Bot – Cut up or recycle your drums loops at the transient peaks, then balance out parallel compression, saturation or distortion by shortening the decay or release envelope. This creates phatter hits, but eases back on the processing of the tails to gain space in the mix.

Eddie Bazil – Actually Tom, try doing it the other way. Slice at the climb before the transient peak. I do this a lot and you will have an easier time using the nudge palette to realign the two files in parallel mode. Try it dude, it’s Jedi.

James Wiltshire – If in Ableton, put the loop in beats mode and hit the playback mode to single arrow ( kinda slice mode ) – then copy the entire track and on the second drop the number next to the arrow which controls the length of each slice .. The second channel will now be perfect for parallel transient processing – works a treat on staccato synths and basses too !

Klaus Hill – I mention ReCycle to youngsters and get a funny look…Still think its the best way to chop up your drums/beats, try it!

Ben Medcalf – Instead of always using samples, try creating incidentals and EFX out of your existing sounds by setting up FX chains on sends – for example, long reverb or delay, modulation, compression – and, where you want the FX to occur, automating the send amount on the original sound up from 0 to the desired amount for a short amount of time (i.e. a beat or two) and back down again. You can add dedicated EFX plugins like Effectrix to the chain (then, i.e., automating the time stretch amount or grain size) for more abstract efx.

John Disgraceland Stanhope – I’ve spent a lot of time reading up on ‘the creative process’ recently, and the thing that comes up time and time again is to work without any thought of quality, or the end product. Just do the work, and when you look up at the end of the day you’ll be amazed at what you have produced.
Sure, when you get to the tweaking phase, this will change, but those first sessions need to be free of tweaking, noodling, whatever. Just get the ideas down. Raw. It’s amazing how good the results are.

James Wiltshire – Had to mix a whole series of projects on just the internal DAW plugins the other day – amazed at how the restriction made me pay much more attention to what I was doing and apart from master channel the internal ( Logic ) tools were all I needed.

Slade Templeton – Another thing I will throw in as I am sitting here mixing and realized I have been focusing on this lately. Pick 3 elements in the song that you want to be the focus. Make them sit well and let them lead cohesively with each other then work around that. For instance, I am mixing a lot of hip hop lately and also Darkwave/Synthpop. So vocals of course is lead, then kick and snare (for 80s vibe it is snare second then arp/synth melodies). once you do this… you can really separate the listening field accordingly. It gives the listener a focus on what elements should matter most. Then work the rest around this to sit well.

James Wiltshire – I challenge everyone to try a mix using only wide band EQ ( low Q ) and say 1 or two bonus Peaking cuts to control the Low mid build up. Tried it last week and it forces you to balance correctly instead of constantly reaching for notch or comby sounding dips.

Jesse Skeens – Agree, this is one thing lacking in a lot of information online. There’s so much focus on the tricks but getting balance and volumes right is 90% of the battle.

Josh Emerse Field – Also never underestimate the importance of the de-esser…It’s not just for vocals. I apply it to my white noise, risers, and anything sibilancy that I need to.There’s nothing worse as a listener to have your ears shattered by unnecessary high frequency assault.

 

The Heavyweight Bass Producer Forum is up on Facebook – click here to join the discussions

Don’t forget to stop by the Heavyweight Bass Facebook page and give us a LIKE !!